Loading ...
Loading ...
Loading ...
Servicing Your Honda
129
Engine Oil & Filter
3.
Remove the oil filter cover (1) and O-rings (2) by removing the
bolts (3). Let the remaining oil drain out. Discard the oil filter (4)
in an approved manner (page 202).
4.
Apply engine oil to a new O-rings and install them to the oil filter
cover and crankcase cover. Then install a new oil filter. Use only
the Honda Genuine oil filter or a filter of equivalent quality
specified for your model. Using the wrong Honda filter or a non-
Honda filter which is not of equivalent quality may cause engine
damage.
5.
Reposition the spring (5) to the engine crankcase and install a
new oil filter with the rubber seal (6) facing out, away from the
engine. You will see the “OUTSIDE (TOWARDS FILTER COVER)”
mark (7) on the filter body, near the seal.
NOTICE
Improper installation of the oil filter can cause serious engine
damage.
(1)
(3)
(6)
(5)
(2)
(1) oil filter cover
(3) bolts
(5) spring
(6) rubber seal
(4)
(7)
(4) oil filter
(2) O-rings
(7) “OUTSIDE” mark
RIGHT SIDE
(2)
(1)
Loading ...
Loading ...
Loading ...