Loading ...
Loading ...
Loading ...
© IMPEX INC. www.impex-fitness.com 8
STEP-3
A.) NOTE: Extra help may be needed to hold the Front Post (#9) while connecting the cables
and wires.
B.) Insert Front Post (#9) through Front Post Cover (#16) and attach Front Post to Main Frame (#1).
C.) Connect the Upper Computer Wire (#34) from the bottom of the Front Post to the Lower Computer
Wire (#35) from the Main Frame.
D.) Pull the tension connector from the Upper Tension Cable (#32) and slide in between the opening
on the connector on the Lower Tension Cable (#33). Pull the Upper Tension Cable upward and
slide the wire through the slot on the bracket.
E.) Drop down the Upper Tension Cable so the fitting sits firmly on top of the bracket.
F.) Secure Front Post to Main Frame with four M8 x 5/8” Allen Bolts (#21) and two Ø ¾” Flat Washers
(#38) on the side and two Curve Washers (#4) on the front.
G.) Attach the Front Right and Left Handle (#11 & #12) to the Front Post. Secure each Handle to Front
Post with two M8 x ⅝” Allen Bolt (#21).
H.) Remove the four M5 x ⅜” Philips Screws (#20) from the Computer (#10). Connect the computer
wire from Computer to the Upper Computer Wire (#34) from Front Post. Slide the Computer onto
Front Post. Secure it with the four Screws.
I.) Attach Right and Left Seat Post Cover (#22 & #23) to each side of Seat Post (#40). Secure Left
Cover (#23) with three ST5 x ⅝” Self Tapping Screws (#24). Secure right Cover (#22) with two ST5
x ⅝” Self Tapping Screws (#24).
Loading ...
Loading ...
Loading ...