Loading ...
Loading ...
Loading ...
13
English
Notes
• Be careful not to cut your hand on the blade when attaching
and removing the comb attachment.
• Do not use with shaving creams applied or when the beard is
wet. Wet beard can stick to the skin or clump making it difficult
for the blade to cut.
• Comb beard and sideburns before trimming.
• Hair trimmings may collect inside the comb attachment when a
large volume of beard is cut, so discard hair trimmings after each
use.
• If the comb attachment is not attached properly, it may become
loose during use resulting in excessive cutting.
Reading lamps when using
During use
ES-RT77/ES-RT67 ES-RT47/ES-RT37
Approximate amount of
battery charge is displayed as
20 – 100.
• It turns off after
approximately 5 seconds.
All lamps disappear while
using.
When the battery capacity is low
ES-RT77/ES-RT67 ES-RT47/ES-RT37
“20” blinks for 5 seconds when
the power switch is pressed.
The battery capacity lamp
blinks for 5 seconds when the
power switch is pressed.
• You can shave 2 to 3 times after “20” blinks. (This will differ
depending on usage.)
ES-RT77/ES-RT67
• You can shave 2 to 3 times after the battery capacity lamp blinks.
(This will differ depending on usage.)
ES-RT47/ES-RT37
• A full charge will supply enough power for approx. 18 shaves of 3
minutes each. (This will differ depending on usage.)
Cleaning the shaver
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some water to the system outer
foil.
3. Turn the shaver on.
4. Turn off the shaver after 10 to 20
seconds.
ES-RT77_67_47_37_US.indb 13 2016/03/07 14:34:08
Loading ...
Loading ...
Loading ...