Loading ...
Loading ...
Loading ...
22
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES SOLUTION
The appliance is
not working
A household fuse or circuit breaker
has tripped due to an overload.
Replace the fuse or switch the
circuit breaker back on again.
The fuse or circuit breaker keeps
blowing.
Contact customer support
An interruption in the power
supply.
Check the power supply.
The appliance is faulty. Contact customer support
Repeated vacuuming has caused
the appliance to overheat.
Allow the appliance to cool down
before using again. Wait for two
minutes after each vacuuming.
The appliance is in a cooling
phase between two dehumidifying
processes. During this time,
Vacuum Level Sealing Level External Vacuum
and
Vacuum Level Sealing Level External Vacuum
buttons are illuminated,
but they cannot be operated.
Wait one hour before repeating
the dehumidifying process.
Insufficient vacuum in
the bag
The vacuuming level selected was
too low for the particular foodstuff
used.
Select the next highest level.
The suction inlet of the vacuum
pump is obstructed.
Ensure the bag is not obstructing
the suction inlet of the vacuum
pump.
The bag is not airtight. Vacuum seal the food in a new
bag, selecting a higher level for
the sealing time if necessary.
The liquid in the vacuum
bag is boiling vigorously
while being vacuumed
Liquids start to boil at low
temperatures when under high
vacuum.
Select vacuuming level 1 for
vacuuming liquid foodstuffs.
Sealing sooner
No vacuum is being
created in the bottle during
external vacuuming
The tube and vacuum stopper are
showing signs of wear and tear.
Replace the tube and vacuum
stopper with new ones.
If there is a problem with your oven, please check the following points before contacting
your local Fisher & Paykel trained and supported service technician or the Customer Care
Centre.
Loading ...
Loading ...
Loading ...