Loading ...
Loading ...
Loading ...
BURNER USE
If the flame is extinguished during a power failure, turn the dial back to OFF as the
burner will not automatically relight and gas may accumulate.
Identify the desired burner and the
corresponding dial.
When the burner is lit, turn the dial to any
setting between
HI (high) and SIM (simmer).
When you have finished cooking, turn the
dial clockwise back to
OFF.
If you are using LP gas, there may be
a slight extinction pop or flash at the flame
spreader a few seconds after the burner has
been turned off. This is normal.
1
2
3
4
Selecting and using burners
Push the dial in and turn counterclockwise
to
LITE. Hold the dial at LITE before turning
to a flame setting.
You should hear a clicking sound when
setting to
LITE. If no clicking sound is
present, turn the dial back clockwise to OFF
and refer to ‘Troubleshooting’ for advice.
10
Loading ...
Loading ...
Loading ...