Loading ...
Loading ...
Loading ...
16
CARE AND MAINTENANCE
1. Inspect and tighten all parts each time you use the bike. Replace any worn parts
immediately.
2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do
not use solvents.
3. Store the bike IN-DOOR. Excess moisture and water would cause rust on the
frame.
4. To avoid possible injury, the help of two or more people are needed when moving
the bike around.
5. Disposal Instructions – The equipment can be safely disassembled and disposed
without unreasonable hazards. Call your local recycle agency regarding details of
recycling.
6. The Maximum user weight on bike is 250 lbs
7. Assembled Dimension: 33.5” x 18.25” x 43.75”
Folded Dimension: 18.25” x 18.25” x 51.5”
OPERATING NOTES
1. Set up and operate the bike on a solid level surface.
2. Inspect and tighten all parts each time before using the bike. Replace any worn
parts immediately. Use parts only from manufacturer to maintain/repair the bike.
3. Inspect and test all features and functions before using the bike.
4. Review all warning notices before using the bike.
5. Electronic warning notices may be obtained by contacting customer support
(suppor[email protected]m).
6. Allow minimum 20” of clear spaces in all directions to operate the bike.
7. Before mounting or dismounting move the pedal on the mounting or dismounting
side to its lowest position and bring the bike to a complete stop.
8. Do not attempt to stop the spinning pedal by feet abruptly. Gradually reduce the
speed of spinning pedal until it is completely stopped.
9. Use Tension Adjustment Knob in front of Seat Post to adjust pedaling resistance.
Switch Knob to “+” direction to increase tension, switch Knob to “-“ direction to
decrease tension.
10. Ensure Lock Pin is completely inserted through the holes before exercising
with the bike.
11. Seat height can be adjusted to five different heights from 31.5” to 35” with ⅞” for
each increment.
12. There are two roller caps on Front Stabilizer. Lift up the Rear and transport.
Loading ...
Loading ...
Loading ...