Loading ...
Loading ...
Loading ...
4
5. Remove the bottom support bracket from the right side.
6. Remove the top right hinge and keep in a safe place in case you want to reverse the door in the
future.
7. Remove the screws from the top left and transfer to the right.
8. Install the top left hinge.
9. Install the bottom left hinge to the door. Do not over-tighten the screw.
10. Place the door back on the appliance, lining up the top hinge.
11. Install the bottom support bracket.
12. Adjust door alignment. When set, tighten screw on hinge.
13. Remove handle. Transfer the screw hole covers to the left and install the handle on the right.
OPERATION
Recommended temperatures for chilling wine:
Red Wines: 15 - 18
°
C (59 - 64.4
°
F)
Dry / White Wines: 9 - 14
°
C (48.2 - 57.2
°
F)
Sparkling Wines: 5 - 8
°
C (41 - 46.4
°
F)
The cabinet temperature may vary slightly depending on whether or not the interior light is ON or OFF,
and whether the bottles are located in the upper/middle or lower section of the cabinet.
The Controls of Your Appliance
The appliance should be placed where the ambient temperature is between 16 - 35
°
C (61 - 95
°
F). If the
ambient temperature is above or below this range, the performance of the unit may be affected. For
example, placing your unit in extremely cold or hot conditions may cause interior temperatures to
fluctuate.
ON/OFF Power
To turn the appliance on or off, press the ON/OFF button for 3 seconds.
LOCK
If you press and hold the button for 3 seconds, the control panel will lock and cannot be
operated again until the button is pressed again. After that, it will operate normally.
LIGHT
You can turn the interior light ON or OFF by pushing the button marked LIGHT. The light will turn off
automatically if it remains ON for 10 minutes. Pushing the LIGHT button again will turn the light back
on. For optimum storage of wine, keep the light off except when viewing.
Setting the temperature control
Loading ...
Loading ...
Loading ...