Loading ...
Loading ...
Loading ...
16
sPeCiFiCAtions*
Frequency Response .....................
Dispersion ............................
Sensitivity.............................
Impedance ............................
Crossover Frequency.....................
High Frequency Driver ...................
Mid Frequency Driver ....................
Low Frequency Drivers ...................
Cabinet ..............................
Components ...........................
Recommended Amp Power ................
Binding Post Inputs ......................
Weight...............................
Dimensions (HxWxD) ....................
Motion 60 XTi
35–25,000 Hz ± 3 dB
80° x 30°
94 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6 or 8 Ohm rated
amplifiers.
400 & 2,200 Hz
1.25” x 2.4” (3.2cm x 6.1cm) Folded Motion
Transducer with 4.5” x 2.75” (11.4cm x 7cm)
diaphragm.
6.5” (16.5cm) aluminum cone with cast polymer
basket. Sealed chamber format. Rigid structured
dust cap to reduce cone break-up modes.
Two 8” (20.3cm) aluminum cone with cast alumi-
num basket. Non-resonant asymmetrical chamber
format. Rigid structured dust cap to reduce cone
break-up modes.
Ported
Custom air core coil and low DCR steel laminate
inductors. Polypropylene film capacitors in series
and low DF electrolytic capacitors in parallel.
Tweeter thermal/current protection.
20–400 watts
Custom 5-way bi-wire tool-less binding posts
66 lbs. (30 kg)
47.95” x 11.42” x 14.38”
(1217.93 x 290 x 320 mm)
*Specifications are subject to change without notice.
Loading ...
Loading ...
Loading ...