Loading ...
Loading ...
Loading ...
Switching on FM radio
1 Press POWER to power on the set.
➜ The LCD lights up.
2 Press SOURCE to select FM mode if "FM"
is not displayed.
➜ Waveband and radio frequency are dis-
played
(see
5
).
Tuning to radio stations
1 In FM mode, press SCAN until frequency
number starts running.
➜ The radio will auto tune to a station of
strong signal strength, and search will
stop.
2 To tune to a weak station, press 1 / 2 until
an optimum reception is found.
3 Repeat the steps above until you find the
desired station.
Helpful hints:
– Before pressing SCAN,you may first press
2
to select a scan up, or press 1 to select a
scan down.
Storing FM presets
You can store up to 5 FM stations on
PRE-
SET
for easy access.
1 In FM mode, tune to your desired radio sta-
tion (Refer to "Tuning to radio stations").
2 Press
PRESET
once, and then press 1 / 2 to
select preset numbers.
3 Press and hold
PRESET
on the top of the
set to store the preset station.
➜ "Preset X Saved" (X indicates preset
numbers) is displayed briefly on the sec-
ond line of the display, and the stored pre-
set number is displayed
(see
6
).
Helpful hints:
– If you have already saved a FM station in that
preset location, it will be overwritten by a
new station.
– When you store FM stations, these do not
overwrite your DAB presets.
Selecting a preset FM station
1 In FM mode, press
PRESET
on the top of
the set.
2 Press 1 / 2 to select presets 1-5.
3 Press SELECT to confirm the selection.
FM Radio
AE5000_05_CCR_Eng/Nor/Dan 2007.9.19 16:28 Page 10
Loading ...
Loading ...
Loading ...