Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
6
CONTROLLER MANUAL
SAFETY INSTRUCTIONS
• This controller is a 12V/24V controller. Make sure your battery has enough voltage
(12V/24V) for the controller to identify the correct battery type before rst
installation.
• Install the controller as close as possible to the battery to avoid voltage drop
caused by long wire and aect normal voltage judgment.
• The controller is suitable for 12V/24V lead-acid batteries, lithium-ion batteries
and LiFePO4 batteries. Please note that the corresponding battery type (default
lead-acid batteries) is selected in the menu.
• This controller can only use solar panel as charging source. Do not use DC or other
power sources.
• This controller will be heated when it is operating. Please pay attention to installing
the controller on a at, well-ventilated surface.
PRODUCT FEATURES
• The main control chip of industrial level is adopted.
• Large LCD display, adjustable parameters.
• Complete three-stage PWM charging management.
• Build-in over-current/short-circuit protection, open-circuit protection and reverse
connection protection are all self-recovery type without damaging the controller.
• Dual MOS anti-backlling circuit, low heat release.
LCD DISPLAY/KEY
VOLTAGE TEMPERATURE
HOUR
AMPERE
LOAD
SYMBOL
OUTPUT
SYMBOL
BATTERY CAPACITY
CHARGING SYMBOL
SOLID ON: BULK CHARGE
FLASHING: FLOAT CHARGE
SOLAR PANEL
DISPLAY AREA
Loading ...
Loading ...
Loading ...