Loading ...
Loading ...
Loading ...
1918
HOW TO DISASSEMBLE AND CLEAN
• It is not necessary to completely clean
the juicer in between making multiple
juices during a single juicing session.
• When nished with juicing, always
disassemble and clean thoroughly
between juicing sessions to prevent
residue buildup.
Tip |
Clean the base with a soft damp towel
and dry.
Remove the juicing screw, strainer and
rotation wiper unit from the juicing bowl.
Clean with provided brush.
Note |
With the smart cap closed, ll the
juicing bowl with water and turn on
the juicer.
Let it run for a moment. Open the
smart cap and let the water run out
of the juicing bowl.
Turn the drum lid counter clockwise to
open.
In order to disassemble, lift o the drum-
set from the base.
Note |
• If the towel is dripping wet, make sure
to squeeze out the excess liquid before
using it on the juicer.
Note |
• When moving the appliance, do not lift by
grabbing the feeding tube. Always lift the
appliance by grabbing the base or handle.
Note |
• Immediately clean the juicer after each use
by lifting off the drum-set from the base.
(Removing the juicing screw and strainer
while drum-set is still on the base may
cause dripping.)
Switch OFF and unplug the power cord
from the wall outlet.
1
1
4 6
7
2
3
1
2
Quick Rinsing
Extract all the remaining pulp in the juicing
bowl before stopping the juicer.
For easier clean up, operate the juicer for
an additional 30 seconds after the juice is
extracted.
When the drum lid is stuck, press the REVERSE –
OFF – FORWARD button in this order, switching
back and forth 2 to 3 times to dislodge. Then
place both hands on the drum lid and firmly
press down while simultaneously turning the
drum lid to open.
*
Fill the juicing bowl with water and run the
juicer before opening the drum lid. It may help
to open the drum lid when stuck.
·
·
·
Note |
Immediately clean the juicer after each
use. If remaining residue in the juicer dries
up, it can make disassembling and clean-
up dicult. The excess build up can cause
poor performance in future uses.
For easier disassembly, place the top-
set in the sink and run the water through
from the top of the top-set.
Thoroughly dry the bottom of the juicing
screw.
TIP |
Place the juicing bowl under running
water.
5
The round brush can clean the juice
spout of the juicing bowl.
Tip |
Note |
Under running water, clean the outside
of the juicing screw with a dish scrub. Use
the tip of the cleaning brush to push out
any residue in the crevices on the bottom
of the juicing screw.
After juicing ingredients with seeds, make
sure to thoroughly clean the bottom
crevice of the juicing screw. (If this area
isn’t properly cleaned, it can cause the
part to be damaged.)
Thoroughly clean the juicing screw
ensuring that the juicing screw is clean
without any residue.
Completely dry before using.
Loading ...
Loading ...
Loading ...