Elica ESL636S3 User Manual

Loading ...

Greaseltersaturationalarm(Optional)

Afterthirtyfanfunctionalhours,thedisplaywillshow

 “GreaseFilter”ifthefanisactive.  

 Whenthisiconisshowninthedisplay,thegreaselters

installed are required to be washed.

Toresetthegreaseltersaturationalarmtheusermust

 pressthe“+”buttonfor5seconds,afterthisactionthe

 icon“Greaselter”isnotdisplayed,andthehoodhas

the normal display operation.

Charcoalltersaturationalarm(Optional)

Afteronehundredandtwentyfunctionalhoursofthefan,

 thedisplaywillshow“CharcoalFilter”ifthefanisactive.

 Whenthisiconashesondisplay,thecharcoallters

installed are required to be replaced or reactivated.

Toresetthecharcoalltersaturationindicationtheuser

 mustpressthe“-”buttonfor5seconds,afterthistime

 theicon“Charcoallter”isnotdisplayedandthehood

has the normal display operation.

Audiblesignalactivationanddeactivation

Theaudiblesignalscanbeactivatedordeactivated 

 pressingthe“Light”buttonfor5seconds.

If the audible signal is activated, a tone must sound and

 the“Snd”symbolmustappearonthedisplayfor3 

seconds.

Iftheaudiblesignalisdeactivated,the“Snd”symbol

must appear on the display for 3 seconds and no tone

must sound.

Charcoallterinclusionandexclusion(Recirculating 

accessories)

Thecharcoallterinclusionorexclusioncanbesetby

 pressingthe“+”and“-”buttonsatthesametimefor5

seconds.

TheInclusionorexclusionofcharcoalltermustbe 

 selectedwhilethelampsandthemotorareOFF.

Whenthecharcoallterhasbeenexcluded,thecharcoal

 lteralarmisdisabled.    

Heatsensor

Thecontrolisequippedwithaheatsensorthatwillturn

on the blower at third speed if excessive heat occurs

(over 149° F or 65°C ) surrounding the control area.

IftheblowerisOFForifitisoperatingatrstspeed,the

blower will be set automatically to third speed, the

 displayshowstheword“CArE“toindicatethatheat 

sensor has detected an excessive heat.

During this state, the user may raise the blower speed to

fourth speed but can not decrease the speed.

When the temperature level on the hood drops to normal,

 theblowerwilloperateinthesettingdenedbytheuser

before the alarm occured.

•

Loading ...

Elica ESL636S3 Convertible Island Chimney Hood with 4Speed 6

User Manual - Page 18