Loading ...
Loading ...
Loading ...
6 Philips · PPX 4010
3 Initial Operation
Setting up the Device
You can find on the market a standard tripod for to ele-
vate the device.
1 Connect one or two USB plug depending on your
needs to a computer to switch on the device.
2 Turn the device towards a suitable projection sur-
face or wall. Note that the distance to the projection
surface must be a minimum of 0.5 meter and a max
-
imum of 5 meters. Make sure the projector is in a
secure position.
3 Use the focus wheel on the top to adjust the image
sharpness.
Connect Power Supply
1 Connect the USB plug to the power adapter (not
included), we recommend using the accessory
PPA6200.
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of the
power supply matches the mains voltage avail
-
able at the setup location.
PPX_4010_UM_EN 253632830.book Page 6 Mardi, 15. décembre 2015 5:02 17
Loading ...
Loading ...
Loading ...