Loading ...
Loading ...
Loading ...
26 27
TROUBLESHOOTING
Symptom Cause Solution
Detergent is
not working.
Detergent container is empty. Add more detergent.
Detergent bottle or suction
tube not properly connected.
Check connections.
Detergent is too thick.
Dilute detergent.
Filter on detergent suction tube
is clogged.
Run warm water through lter to remove
build-up.
Damaged or clogged detergent
suction tube.
Remove obstruction or replace detergent
suction tube.
Nozzle is in high-pressure
position.
Use low pressure (black) tip.
Discharge nozzle is obstructed.
Blow out or remove debris with a ne
needle.
Loose ttings.
Tighten ttings.
Garden hose
connection
leaks.
Missing / worn rubber washer.
Insert new washer.
Spray nozzle not properly
attached.
Ensure quick-connect wand is attached
securely.
Ensure spray tip is clicked in securely.
Spray wand,
extension, or
nozzle leaks.
Broken O-ring or plastic insert.
Call the customer service centre.
Pump is sucking air.
Check that hoses and ttings are airtight.
Turn off machine and purge pump by
squeezing trigger gun until a steady ow of
water emerges through the nozzle.
Pump is noisy.
Water lter is clogged.
Remove water lter and rinse in warm
water.
Loose ttings.
Check that all ttings are tight.
Motor buzzes
but fails to run.
System has residual pressure.
Turn unit OFF, squeeze trigger on spray
wand to release pressure and then turn unit
ON.
Voltage loss due to extension
cord.
Unplug any extension cords attached and
plug the unit directly into the outlet.
Pressure washer not used for
long periods.
Call the customer service centre.
Motor buzzes
but fails to run.
(continued)
Residual friction among
components. Unit might hum.
Disconnect water supply and power ON for
2 to 3 seconds, repeat or until the motor
starts.
Water supply is OFF.
Turn ON water supply.
No water.
Kink in the garden hose.
Remove kink in garden hose.
DECLARATION OF CONFORMITY
To the provisions of Council Directives
We
SUMEC UK Co.,Ltd.
Unit A&B, Escrick Business Park
Escrick, York YO 19 6FD
Declare that the product:
Machine Description: 1800W High Pressure Washer
Q1W-SP09-1800 / EW U13
Function: Clean the walls of buildings etc.
Complies with essential health and safety requirements of
the following directives:
Machinery Directive 2006/42/EC
Electromagnetic Compatibility Directive 2014/30/EU
RoHS Directive 2011/65/EU
Noise Emission in the Environment by Equipment for Use Outdoors Directive
2000/14/EC amended by 2005/88/EC
Conformity Assessment Procedure as Per Annex V
Measured Sound Power Level: 89 dB (A)
Declared Guaranteed Sound Power Level: 92 dB (A)
Standards and technical specification referred to:
EN 60335-2-79: 2012
EN 60335-1: 2012/A11: 2014
EN 62233: 2008
EN 55014-1: 2017
EN 55014-2: 2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
Authorized Signatory
Date: 11.10.2017
Signature:________________________
Place: York
Name: Mariana Hall
General Manager
SUMEC UK
Unit A&B Escrick Business Park
Escrick, York
YO19 6FD