Loading ...
Loading ...
Loading ...
7
OPERATING YOUR WINE COOLER/BEVERAGE COOLER
AND SETTING THE TEMPERATURE CONTROL
Control System Instruction
• “
” Button
To control this appliance turn on/off ( press and hold this buttons for approximately
3 seconds).
• “
” Button
To control the inner light turn on/off.
• “
” Button
Used to raise(warm) the temperature in 1℉（1℃）.
• “
” Button
Used to lower(cool) the temperature in 1℉（1℃）.
• “ο”
Indicator light illuminates to signify the cooling mode is currently in operation.
• “DISPLAY”
To shows the temperature of the set temperature.
Setting The Temperature Controls
Set the desired cooling temperature by pressing the buttons adjacent to the " " or " "
indicators. Each press of the buttons will scroll through the available temperature settings in
increments of 1°C.
The temperature setting can be adjusted from 5℃ to 18℃.
If you want to reveal every indoor actual temperature, please press and hold the " " or
" " button for 3 seconds, the LED will flash and display the actual temperature. After
stopping pressing the button for 5 seconds, LED figure will stop flash, then revert back to display
the set temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
Temperature Alar
m
If the temperature inside is higher than 23 ℃, it will display "HI" on the display panel, and after one
hour after the alarm / buzzer will sound. This indicates that the temperature inside is too high. If the
temperature inside is lower than 0 ℃, it will display "LO" on the display panel and at the same time
the alarm also malfunction indicator is active
Loading ...
Loading ...
Loading ...