Loading ...
Loading ...
Loading ...
Consumer Support Troubleshooting Tips
Operating Instructions Safety InstructionsInstallation Instructions
12
About the refrigerator doors.
Refrigerator Doors
The refrigerator doors may feel
different than the ones you are used to.
The special door opening/closing
feature makes sure the doors close
all the way and are securely sealed.
When opening and closing the door you
will notice a
stop
position. If the door is
opened past this
stop
point, the door will
remain open to allow you to load and
unload food more easily. When the door
is only partially open, it will automatically
close.
The resistance you feel at the
stop
position will be reduced as the door
is loaded with food.
When the door is only partially open, it will
automatically close.
Beyond this stop the door will stay open.
Door Alignment
If doors are uneven, adjust
the refrigerator door.
Using a 7/16″ wrench, turn the
door adjusting screw to the right to
raise the door, to the left to lower it.
(A nylon plug, imbedded in
the threads of the pin, prevents
the pin from turning unless
a wrench is used.)
After one or two turns
of the wrench, open and close
the refrigerator door and check
the alignment at the top
of the doors.
7/16″ Wrench
Raise
Support Leg
Before moving the refrigerator, you will
need to screw up the support leg. Once
the unit is relocated, you will need to
screw down the support leg again.
Screw down the support
leg until it touches the
floor. This will prevent
door misalignment.
Loading ...
Loading ...
Loading ...