Loading ...
Loading ...
Loading ...
Page 6
Installation
CONNECTING TO ELECTRICAL POWER cont’d.
If the unit needs to be hard-wired, have a licensed electrician connect the unit to the power supply.
Three Phase Units:
You must conrm proper rotation of all 3 phase mixers prior using the mixer. There is a
50% chance your 3 phase mixer is properly rotating if you are using it on 3 phase power
1. Make sure there is not a mixing tool on the mixer shaft and the bowl is empty.
2. Put the speed lever on one speed and turn the unit on.
3. Make sure the large, gray planetary casting is going in the direction of the arrow on
the mixer as you stand in the front of the mixer (clockwise). (Do not pay attention to the
shaft rotation.) If it is traveling in the wrong direction have a licensed electrician switch
the electrical connection and retest.
9. Complete the warranty registration online at www.globeslicers.com/warranty.asp.
10. Clean the mixer prior to using it. Follow the cleaning instructions starting on page 11.
NOTE: It is normal for the factory to apply a generous amount of grease in and on the machines before initial
use. Excess grease (brown in color) will be on all metal surfaces (e.g. top portion of bowl guard, speed
control, bowl clamps, bowl lift lever, and attachment hub thumbscrew). Excess high-pressured grease
(brownish-black) may also be found on the planetary shaft and some drippings may be found in the bowl.
Operating Instructions
TO AVOID SERIOUS PERSONAL INJURY:
• DO NOT operate the mixer before reading the instruction manual rst.
• ALWAYS disconnect or unplug electrical power before cleaning, servicing, or
adjusting any parts or attachments.
• ALWAYS keep hands, hair, and clothing away from moving parts.
ABOUT THE REMOVABLE BOWL GUARD (if applicable)
The bowl guard can be rotated or removed to accommodate the operator’s function. The interlocking bowl guard is
easy to remove and reattach for easy cleaning in a sink or dishwasher.
NOTE: When guard is open or not properly installed, the mixer will not operate.
NOTE: Rotate the bowl guard clockwise (open) and counterclockwise (closed) to
attach agitators to the mixer.
Opening / Rotating the Bowl Guard:
Rotating the bowl guard clockwise (open) and counterclockwise (closed), allows the
operator to easily add ingredients and properly remove the agitator and bowl from the
mixer.
1. When the separated handles are lined up together and pushed securely to the right
of the mixer, the bowl guard is in the locked position and ready. (See g. 6-1)
g. 6-1
Loading ...
Loading ...
Loading ...