Loading ...
Loading ...
www.SereneLifeHome.com
12. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug
will t in a polarized outlet only one way, if the plug does not t fully in the outlet, reverse the plug. If it still does not
t contact a qualied electrician to install the proper outlet. Do not change the plug in any way.
13. It is not recommended to plug into the 120V power source unattended when not in use.
14. Do not obstruct ventilation hole on pump.
15. Do not open the pump case-electrical hazard may result. No user serviceable parts.
16. Do not over-inate.
17. For proper Setup Pump usage, it is recommended not to exceed 5 minutes of continuous ination/deation time.
18. In case the pump overheats due to excessive continuous ination/deation, the power will automatically cut o and
reset to begin working within 30 minutes.
19. A re may occur if this devices touches or is covered by ammable material, including curtains, draperies, walls, etc.,
when in operation.
20. DO NOT place any ammable material such as paper, cardboard, plastic on the pump.
21. DO NOT operate the pump in enclosed spaces that are not well-ventilated.
22. DO NOT operate in the presence of explosive and/or ammable fumes.
23. DO NOT place any part of the pump or cord in or under water or other liquid.
24. DO NOT leave device unattended when in operation.
25. Do clean airbed with only damp cloth soaked in mild soap and water.
26. The Maximum Weight Capacity for the Queen Size is 500 lbs. Full size is 500 lbs and Twin size is 350 lbs.
27. Do not use near people using or wearing medical devices.
SAVE THESE INSTRUCTIONS
SERVICING OF DOUBLE-INSULATED PRODUCTS
This appliance is double insulated. In a double-insulated product, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated product, nor is a means for grounding to be added to
the product. Servicing a double-insulated product requires extreme care and knowledge of the system, and is to be done
only by factory qualied service personnel. Replacement parts for a double-insulated product must be identical to the
parts they replace.
NOTE: Airbed material may stretch during rst use and may need additional air to reach desired rmness. Air inside of
bed may expand and contract with varying temperatures potentially leading to reduced pressure inside of the bed. If this
occurs, simply add more air using the built-in pump to achieve desired rmness. For better protection of this product,
never unfold or inate the airbed in temperatures below freezing, avoid extensive exposure to the sun and protect from
contact with sharp objects and rough ground. Make sure to handle the pump with care.
CARE AND MAINTENANCE: Clean airbed with only damp cloth soaked in mild soap and water.
REPAIRING (Repair kit included): First, deate the bed by following the instructions for deation. Clean and repair the
aected area thoroughly. Cut a piece of clear patch material (included in the repair kit) into a size that will cover the
puncture. Apply the self-adhesive patch over the aected area by peeling o the backing and placing sticky side down on
airbed. Rub patch to ensure adhesion. Allow four (4) hours for repair to set before attempting to inate the airbed. Any
other servicing is to be performed by an authorized service representative.
IMPORTANT SAFETY INFORMATION AND WARNINGS
Adult supervision required for setup. Warning this is an electrical product. To avoid risk of re, burns, injury, and shock, it
should not be played on or placed near where small children can reach it. Do not use in or around water. Not to be used
outside, this bed is for indoor use only. The bed should be placed in an open area before use. Making sure there are no
sharp objects, steps, drops, or breakable objects in the area. Unplug when not being used.
Loading ...
Loading ...
Loading ...