Loading ...
Loading ...
Loading ...
ENGLISH
69
Data 08 (when checking the temperature of each
temperature sensor when the monitor set was
last powered off)
Acknowledgment
(v)( )([Set ID])( )(OK/NG)(Data)(Data1)
(Data2)(Data3)(x)
Data1 The temperature of the Top sensor when the
monitor set was last powered off.
Data2 The temperature of the Bottom sensor when the
monitor set was last powered off.
Data3 The temperature of the Main sensor when the
monitor set was last powered off.
Data 09 (when checking the fan speed)
Acknowledgment
(v)( )([Set ID])( )(OK/NG)(Data)(Data1)(Data2)(x)
Data1 00-ff: The upper 1-byte of the fan speed
Data2 00-ff: The lower 1-byte of the fan speed
Fan speed: 0 to 2008 in hexadecimal and 0 to 8200 in
decimal
* This feature may not be supported on some models.
47. [Screen Fault Detection] (Command: t z)
Sets the Screen Fault Detection feature.
Transmission
(t)(z)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(z)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
48. [Daylight Saving Time] (Command: s d)
Sets Daylight Savings Time.
Transmission
(s)(d)( )([Set ID])( )(Data1)( )(Data2)( )
(Data3)( ) (Data4)( )(Data5)( )(Cr)
Data1 00: [Off] (Data2-5: FF)
01: Start time
02: End time
Data2 01-0C: January to December
Data3 01 to 06: Weeks 1 to 6
* The maximum value of [Data3] may vary depending on the
date.
Data4 00 to 06 (Sunday to Saturday)
Data5 00 to17: Hour 00 to hour 23
* If you wish to read the start/end times, enter FF for
parameters [Data2] through [Data5].
(E.g. 1: sd 01 01 ff ff ff ff - Checks the end time.)
(E.g. 2: sd 01 02 ff ff ff ff - Checks the start time.)
* This feature only works when Clock 1 (year/month/day) and
Clock 2 (hour/minute/second) have been set.
Acknowledgment
(d)( )([Set ID])( )(OK/NG)(Data1)(Data2)
(Data3)(Data4)(Data5)(x)
* This feature may not be supported on some models.
49. [PM Mode] (Command: s n, 0c)
Sets the PM mode.
Transmission
(s)(n)( )([Set ID])( )(0c)( )(Data)(Cr)
Data 00: Activates Power Off mode
01: Activates [Sustain Aspect Ratio] mode
02: Activates [Screen Off] mode
03: Activates [Screen Off Always] mode
04: Activates [Screen Off & Backlight] mode
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(0c)(Data)(x)
* This feature may not be supported on some models.
Loading ...
Loading ...
Loading ...