Loading ...
Loading ...
Loading ...
7
When you press the button once, the temperature will increase or decrease by 1°F (or 1°C). If
you try to go beyond the minimum/maximum value that can be established, the display will
jump to the lowest/highest adjustable temperature value automatically. If a button is not
pressed for 5 seconds, the LED will stop flashing and the setting mode will be exited.
You can set the temperature in the range of 39°F to 64°F (or 4°C to 18°C) .
FUNCTIONS
Temperature Memory Function
If the power is suddenly lost, the set temperature will be saved by the unit. Once the power is back on,
the unit will be at the same set temperature.
TEMPERATURE ALARM FUNCTION
If the interior temperature is higher than 73°F (23°C), “HI” is shown on the display panel and the
buzzer alarm sounds continuously after one hour. This indicates that the inner temperature is too
high, and you should look for the reason. If the inner temperature is lower than 32°F (0°C), “LO” is
shown on the display panel; the alarm and the malfunction indicator light go on at the same time.
NOTES
If too many bottles are put in at once or the door has not been closed tightly, the unit will display the
"HI" signal on the display panel. This is normal. Please wait 5 minutes after closing the door and
“HI” will disappear.
It is normal that the cabinet shows “HI” or “LO” from time to time. If it occurs frequently or lasts for a
long time, you can restart the unit by unplugging it, then re-plugging after 5 minutes. If the problem
occurs again after restarting, please contact customer service.
Before reconnecting the power, wait 3 to 5 minutes. Otherwise you could damage your appliance. If
you attempt to start the appliance before the end of this time delay, the appliance will not turn on.
If you turn on the appliance for the first time or after a restart, or after it has been out of
operation for a long time, there may be a temperature difference between the temperature inside
the appliance and that on the LED display. This is a normal event caused by the duration of the
activation period. Leave the appliance turned on for several hours and the temperatures will
stabilize during operation.
Loading ...
Loading ...
Loading ...