Loading ...
Loading ...
Loading ...
User guide
Billi B-5000 – XT, XR.
6
Options and Operation
To operate, simple press the red (left) button
to dispense boiling water, and blue (right)
button to dispense chilled filtered water.
When the red or blue lights are double
tapped, the water will dispense continually
until interrupted by another light press of
either blue or red buttons.
Operating modes can be selected by the user
by entering option mode. Within the options
mode, you can set the safety switch thorough
the red button (left) and power save mode
through the blue button (right)
To enter the options mode:
1. Turn on the unit and wait for normal
operation (red and blue buttons are both
illuminated constantly)
2. Press both the red and blue buttons.
While pressing the two buttons, touch
the red lock icon located in the middle
and towards the back of the lens.
Press and hold both red and blue buttons
and safety switch for three seconds.
3. Icons will flash yellow.
4. Release the safety switch and buttons.
5. Unit is now in options mode.
6. If you wish to change or activate the power
saving mode, follow the power save mode
settings procedure below.
Safety Switch settings
The Red padlock indicates the dierent
safety settings enabled. To change or activate
a setting once in options mode as above,
press and release the red (left) button to
scroll through the following options;
– Red Icon O: indicates the hot tap
is disabled.
– Padlock icon on, Red icon on: indicates
safety switch is enabled
– Red Icon On: indicates normal operation
with safety switch not enabled.
To save new setting and exit Options Mode,
touch the safety switch and release. Wait 10
seconds for unit to return to normal operation,
with the desired settings.
To dispense boiling water once the safety
switch is activated simply touch the red lock
icon on the top of the lens. You will be able
to dispense boiling water for 8 seconds.
After 8 seconds the safety switch will
automatically reactivate, and the red
padlock icon will appear again.
Power save mode settings
(EcoIntelligence, standby or on 24/7)
The Green icons on the tap indicate the
power save level that is selected. To change
or activate a setting once in options mode
press and release the blue (right) button
to scroll through the following options;
– Green Leaf icon: indicates Eco Intelligence
self learning timer is enabled.
– Moon & Star Icon on: indicates Standby
Mode is enabled.
– Blue Icon On, no green icons: indicates
system is in 24 hour continuous mode
To save new setting and exit Options Mode,
press the safety switch and release. Wait 10
seconds for unit to return to normal operation,
with the desired settings.
Holiday mode
To set press the pressure relief valve located
under the unit cover beside the filter housing.
Loading ...
Loading ...
Loading ...