Loading ...
Loading ...
Loading ...
30
Chest Strap
Using the provided heart rate transmitter chest strap lets you monitor your heart rate at any time
during your workout.
Consult a physician before you start an exercise program. Stop exercising if you
feel pain or tightness in your chest, become short of breath, or feel faint. Contact
your doctor before you use the machine again. Use the values calculated
or measured by the machine’s computer for reference purposes only.
The heart rate transmitter is attached to a chest strap to keep your hands free during your
workout. To put on your chest strap:
1. Attach the transmitter to the elastic chest strap.
2. Secure the strap around your chest with the curve of the transmitter oriented upward, just below the chest muscles.
3. Lift the transmitter off your chest and moisten the two Grooved Electrode Areas on the back.
4. Check that the wet electrode areas are firmly against your skin.
The transmitter will send your heart rate to the machine’s receiver and display your estimated Beats Per Minute (BPM).
Always remove the transmitter before you clean the chest strap. Clean the chest strap regularly with mild soap and water, and
thoroughly dry it. Residual sweat and moisture may keep the transmitter active and drain the battery in the transmitter. Dry
and wipe clean the transmitter after each use.
Note: Do not use abrasives or chemicals such as steel wool or alcohol when you clean the chest strap, as they can
damage the electrodes permanently.
If the Console does not display a heart rate value, the transmitter may be at fault. Check that the textured contact areas
on the chest strap are making contact with your skin. You may need to lightly wet the contact areas. Check that the curve
of the transmitter is oriented upward. If no signal appears or you need further assistance, contact your local distributor for
assistance.
Loading ...
Loading ...
Loading ...