Loading ...
Loading ...
Loading ...
Part Number: 040006019 Rev. 01 09/18 21
Section 4 Maintenance
Step 18 Mix a solution of sanitizer and warm water.
Solution Type Water Mixed With
Sanitizer 6 gal (23 L)
4 oz (120 ml)
sanitizer
Step 19 Use 1/2 of the sanitizer/water solution to sanitize
all removed components. Use a cloth or sponge to liberally
apply the solution to all surfaces of the removed parts or
soak the removed parts in the sanitizer/water solution. Do
not rinse parts after sanitizing.
Step 20 Use 1/2 of the sanitizer/water solution to sanitize
all foodzone surfaces of the ice machine and bin. Use a cloth
or sponge to liberally apply the solution. When sanitizing,
pay particular attention to the following areas:
• Evaporator plastic parts – including top, bottom and sides
• Bin bottom, sides and top
Do not rinse the sanitized areas.
Step 21 Replace all removed components.
Step 22 Reapply power and water to the ice machine and
place the toggle switch in the ICE position.
Exterior Cleaning
Clean the area around the ice machine as often as necessary
to maintain cleanliness and efficient operation.
Sponge any dust and dirt off the outside of the ice machine
with mild soap and water. Wipe dry with a clean, soft cloth.
Treat all exterior stainless steel surfaces with a commercial
grade stainless steel cleaner/polish.
Iie Maihine Inspeition
Check all water fittings and lines for leaks. Also, make sure
the refrigeration tubing is not rubbing or vibrating against
other tubing, panels, etc.
Do not put anything (boxes, etc.) in front of the ice machine.
There must be adequate airflow through and around the
ice machine to maximize ice production and ensure long
component life.
Loading ...
Loading ...
Loading ...