Loading ...
Loading ...
Loading ...
69
Maintenance
Final Drive Oil
Checking the Final Drive Oil
1.
Place your motorcycle on the side stand
on a level surface.
2.
Remove the oil fill hole cap.
3.
Check the oil level. It should be flush with
the lower edge of the oil fill hole.
Adding Final Drive Oil
If the final drive oil level is low, check for oil
leaks. Add the recommended final drive oil
(2 P. 48) until it
reaches the lower edge of
the opening.
1.
Pour the final drive oil into the oil fill hole
until it reaches the lower edge of the
opening.
uDo not over fill above the lower edge of
oil fill hole.
uMake sure no foreign objects enter the
oil fill hole.
uWipe up any spills immediately.
2.
Reinstall the oil fill hole cap and tighten.
Oil fill hole cap
Lower edge
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
Loading ...
Loading ...
Loading ...