Loading ...
Loading ...
Loading ...
!
EN
55
This lights up when the START/PAUSE
button has been pressed.
! Each time the DELAY START button is
pressed the indicator lights show how
many hours of delay you chosen (3, 6 or 9
hours) and the countdown until the end of it.
! When a programme is running, the
indicator lights will light in sequence to
indicate the current phase:
main wash
rinse
spin
! The indicator light is illuminated when the
door is fully closed.
! When START/PAUSE is pressed on
the machine with the door closed, the
indicator will flash momentarily and then
illuminate.
! A special safety device prevents the door
from being opened immediately after the
end of the cycle. Wait for 2 minutes after
the wash cycle has finished and the
DOOR LOCKED light has gone out before
opening the door. At the end of the cycle
turn the programme selector to OFF.
When you set a program, the maximum
possible spin speed will be automatically
shown by the relevant indicator light.
Choosing a smaller spin speed by the
appropriate button, the relevant indicator
light will go on.
These light up when the relevant buttons
are pressed.
PROGRAMME START indicator light
DELAY START TIME / WASH
STAGE indicator lights
DOOR LOCKED indicator light
Close the door BEFORE selecting the
START/PAUSE button.
If the door is not properly closed,
the light will continue to flash for
about 7 seconds, after which the
start command will be automatically
cancelled. In this case, close the
door in the proper way and press
the START/PAUSE button.
SPIN SPEED indicator lights
OPTION BUTTONS indicator lights
If an option is selected that is not
compatible with the selected
programme then the option indicator
light first flashes and then goes off.
Loading ...
Loading ...
Loading ...