Wolf SPO30PESP User Manual

Loading ...

wolfappliance.com | 7

Installation

1 Turn off power to the electrical outlet.

2 Move the unit near the opening. Remove and recycle

packing materials.

3 The 30" (762) model is shipped with two shipping

brackets located on each side, behind the front face.

Remove both brackets, then reinstall the screws. Refer

to the illustration below.

4 Plug the power cord into the grounded outlet.

5 Position the oven in the opening and slide back until

the mounting ange is ush with the face of the cabinet.

Avoid pinching the power cord between the unit and

cabinet wall.

6 Open the door. Using the two holes on either side of the

mounting ange as a template, drill pilot holes into the

cabinet using a

/16" drill bit.

7 Mount the oven using the four screws provided. Refer to

the illustration below.

8 Turn power back on to the electrical outlet.

Troubleshooting

IMPORTANT NOTE: If the speed oven does not operate

properly, follow these troubleshooting steps:

• Verify electrical power is supplied to the oven.

• Verify proper electrical connections.

• If the oven does not operate properly, contact Wolf

Factory Certied Service. Do not attempt to repair the

oven. Wolf is not responsible for service required to

correct a faulty installation.

INSTALLATION

REMOVE

BRACKETS

THEN REINSTALL

SCREWS

MOUNTING

SCREWS

Shipping brackets

Mounting screws

Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &

Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.

All other trademarks are property of their respective owners in the United States and other countries.

Loading ...

Wolf SPO30PESP 30" E Series Professional Built-In Stainless Steel Speed Oven

User Manual - Page 7