Loading ...
Loading ...
programme phases
wash
rinse
spin-drain
PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed..
2.- Add detergent and additives, not exceeding the maximum level indicator.
detergent for pre-wash I
detergent for wash programme II
fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Turn the programme selector (A) to the desired programme.
4.- Press the key or keys for any options desired (C1, C2,).
.- It is advisable to select the required options before pressing the Programme Start key (H).
.- Remember that if the programme has already passed the stage at which an option is activated, that
option will not be implemented.
C1 cold wash key
By pressing this button it is possible to transform every programme into a cold washing one, without
modify other characteristics (water level, times, rythmes, etc..).
Curtains, small carpets, man made delicate fabrics, non coulor fast garments can be safely washed
thanks to this new device.
C2 aquaplus (sensitive key)
Thanks to the new SENSOR ACTIVA SYSTEM, by pressing the key it is possible to run a special
washing cycle applicable to all programs and types of fabric, caring for their fibres and the delicate skin
of the users who use them.
Taking on much more water, together with the new combined action of drum rotation cycles and taking
on and discharging water allow you to obtain perfectly clean, rinsed clothes. More water is used in the
wash to dissolve the detergent completely, ensuring an effective washing action. The water in the rinses
has also been increased to eliminate all trace of detergent in the fibres.
This function has been specifically studied for people with delicate, sensitive skin, who can suffer
irritation or allergy from the slightest detergent residue.
It is also advisable to use this function for children's clothes and delicate fabrics in general, especially for
washing bathrobes, whose fibres tend to retain detergent.
This option is not available for the wool program.
B1 spin selector key
You can use this key to select final spin speed, but only within the range of speeds of the programme
selected. These speeds are displayed via the corresponding lamp. Press the button and keep pressed
until the three speed indicator lights go out (
).
You can select the desired speed at any time during the programme.
5.- Once you have selected the desired options, press the START key
(H). The washing machine will
start up and one of the time remaining lamps /programme phase (V) will come on. This lamp indicates
approximately how much time is left before the wash programme is completed or the programme phase:
it will change as the programme progresses. To cancel an option after setting, just press the option key
again (the indicator lamp will go out).
Loading ...