Loading ...
Loading ...
Loading ...
www.PyleUSA.com
4
TWS Function:
1. Turn ON two identical speakers you want to pair, please be noted that they
must have the same BT paring name, both under BT mode. You only need to set
up one of the two units;
2. Press and hold “PLAY/PAUSE” button for around 4 seconds, speaker will make a
tone “di” to start pairing, and will make “di” voice for 3 times once successfully
paired;
3. Connect Wireless BT with your mobile phone to play music by the two paired
Speakers to create more powerful surround sound eect.
4. If you want to exit the TWS mode, press and hold “PLAY/PAUSE” button (of the
unit that you set at beginning) again to exit the TWS function.
Remark: Under the TWS mode, if you connect your mobile phone to the unit (you
set at beginning) via the provided audio cable, it will start to play AUX via TWS
function, under this status, you can not switch to Wireless BT mode by pressing
the Mode button.
AUX-IN:
For other compatible music devices or your MP3/MP4 players, use the supplied
audio line cable to connect from the device’s “Line Out” to the “Aux In” of this
device. Then press the “MODE” button, the speaker will prompt “Aux Input Mode”,
then Enjoy.. When using an external device, all functions can be controlled by the
external device.
Remarks:
1. To turn the unit on, press and hold the Power button for 3 seconds;
2. Press the MODE button to switch for dierent modes, the order is BT, USB disk,
Micro SD, FM radio and AUX-IN.
3. When the speaker’s Wireless BT is connected with one mobile device, user can
press and hold the Mode button to disconnect the previous device, then
connect Wireless BT to your another mobile device;
4. Default volume is at 50% status of max volume;
5. When the battery voltage is low, the speaker will prompt “Battery Is Low, Please
Recharge In Time”;
6. Turn the power button to “OFF” if not in use.
Loading ...
Loading ...