Loading ...
Loading ...
Loading ...
＋−
＋−
The clock displays the time with the
ignition switch in the ON (II)
position.
When you finish the minute
adjustment, press and release the
CLOCK button. The hour display
will blink. Adjust the hour by
pressing the or button.
Press and hold the CLOCK button
until the minute display blinks.
Adjusttheminutebypressingthe
or button.
Turn the ignition switch to ON (II).
To set the clock:
When you finish all the
adjustments, press the CLOCK
button again.
This shows how much fuel you have.
It may show slightly more or less
than the actual amount.
This shows the temperature of the
engine’s coolant. During normal
operation, the reading should be in
the middle of the gauge. In severe
driving conditions, such as very hot
weather or a long period of uphill
driving, the reading may reach near
the red mark. If it reaches the red
(Hot) mark, pull safely to the side of
the road. See page for
instructions and precautions on
checking the engine’s cooling
system.
1.
2.
3.
4.
167
Gauges
ClockFuel Gauge Temperature Gauge
Instruments and Controls
45
Avoid driving with an extremely low
fuel level. Running out of fuel could
cause the engine to misfire, damaging
the catalytic converter.
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...