Loading ...
Loading ...
Loading ...
14
Operations
Controls
1. Safety Lock – Prevents unintended operation of
th
e machine.
2. Switch Levers – Turns machine on/off.
Operations
For indoor use only.
Pour utilisation à l'intérieur seulement.
When using the pad, always keep the machine
moving when in contact with the floor.
Couple de démarrage élevé. Tenez la machine
fermement à deux mains.
High starting torque. Hold machine firmly with
both hands.
Couple de démarrage élevé. Tenez la machine
fermement à deux mains.
1. Ensure that the pad driver is in good shap
e.
Install or
change pad if necessary.
2. Plug the machine into a wall outlet as described
in the grounding instructions.
3. Release latch, lower the handle an
d move into
posit
ion.
4. Push the safety lock forward, un
locking the
sw
itch levers.
5. With the safety lock forward, squeeze one or
both of the switch levers, turning the machine on
.
(
These levers can be operated independe
ntly of
each other).
The safety lock
will not re-engage
un
til both levers are released.
6. To stop the machine, release the switch leve
rs.
7.
Do not let machine rest on pad. When finish
ed
with
the machine, return handle to the storag
e
po
sition
.
NOTE:
The machine is equipped with a circuit
breaker to protect the motor in the event an
overload condition occurs. The circuit breaker is
located on the handle. Push the reset button to
restart the machine. If the breaker trips again,
correct the cause of overloading before proceeding.
Maintenance
1. Inspect power cord for wear. To prevent electrical
sho
ck replace cords with frayed or cracked insu-
lation immediately.
2. Place machine in the storage position.
3. Check pad condition. Change if soiled or torn.
Pad Installation
1. Lay machine back, exposing the under side.
2. Remove center lock by turning counter-clock-
wise.
3. Ensure pad is centered on pad driver. Pull pad
to
ed
ge of pad driver in several directions to check
for proper engagement.
4. Replace center lock by turning clockwise firm
ly
comp
ressing the center of the pad.
22
1
HANDLE
RELEASE
LATCH
86387310 Operators Manual - High Speed Burnisher (2000 Series)
Loading ...
Loading ...
Loading ...