Loading ...
Loading ...
Loading ...
7.2 PLACE THE MOWER UPRIGHT IN
VER
TICAL POSITION
15
G
G
1
5
14 14
4
5
1. Place the mower upright in vertical position.
2.
Remove the packing material from the cable.
3. Remove the rubber edge guard (G) from the upper
handle.
4. Insert the upper handle (4) into the lower handle (5).
5. Put the bolts (15) through the holes and tighten with the
nuts (14), using a Philips head screwdriver (not included).
W
ARNING
Do not damage the cable while installing the upper handle.
7.3 UNFOLD THE LOWER HANDLE
5
16
17
1. Pull up on the handle holes (16) to release the lower
handles (5).
2.
Fold the lower handle up until the handle pins (17) lock
into position.
NOTE
Make sure that the two handle pins are in the same position.
7.4 INSTALL THE GRASS CATCHER
1
1
6
18
19
1. Remove the mulch plug.
2.
Remove the side discharge chute.
3. Open the rear discharge door (6) and hold it.
4. Hold the the grass catcher (11) by its handle and engage
the hooks (18) on the door rod (19).
5. Close the rear discharge door.
7.5 INSTALL THE MULCH PLUG
6
13
1. Remove the grass catcher.
2.
Open the rear discharge door (6) and hold it.
9
English
EN
Loading ...
Loading ...
Loading ...