Loading ...
Loading ...
Loading ...
13
Style 4 - Electronic Oven Control (on some models)
Display
Style 1 - Electronic Oven Control
When power is first supplied to the appliance, “12:00 PM” will
appear on the display. See “Clock” section to set time of day.
If “12:00 PM” appears at any other time, a power failure has
occurred. Press OFF/CANCEL and reset the clock if needed.
When the oven is not in use, the display shows the time of day.
Styles 2, 3 & 4 - Electronic Oven Controls
When power is first supplied to the appliance, a flashing time will
appear on the display. Press OFF/CANCEL to clear the display.
If a flashing time appears at any other time, a power failure has
occurred. Press OFF/CANCEL and reset the clock if needed.
When the oven is not in use, the display shows the time of day.
When performing a timed cook function, the display will show
either hours and minutes, or minutes and seconds.
Start
Style 1 - Electronic Oven Control
The Start pad begins any oven function. The display will show
SET TEMP OR TIME OR PUSH START.
Styles 2, 3 & 4 - Electronic Oven Controls
The Start pad begins any oven function. If the Start pad is not
pressed within 5 seconds after pressing a function pad, the
“START?” or “?” indicator light will appear on the display (on
some models).
If the Start pad is not pressed within 5 minutes after pressing a
function pad, the oven display will return to the time of day mode
and the programmed function will be canceled.
Off/Cancel
The Off/Cancel pad stops any function except the Timer, Control
Lock or Warm Drawer (on some models).
Clock
On some models, this is a 12-hour clock that shows a.m. and
p.m.
To Set:
Before setting, make sure the oven and Timer are off.
1. Press CLOCK.
2. Depending on your model, press the HOUR or MIN, TEMP/
TIME or TEMP/HOUR “up” or “down” arrow pads to set the
time of day, including a.m. or p.m.
3. Press CLOCK.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
■ Valid pad press
■ Oven is preheating (long tone)
■ Function has been entered
■ Reminder (on some models), repeating each minute after the
end-of-cycle tones
Three tones
■ Invalid pad press
Four tones
■ End of cycle
Style 1 - Electronic Oven Control
Reminder Tones: Reminder tones may be turned off. Press and
hold BAKE for 5 seconds. REMINDER TONES OFF will appear on
the display. Repeat to turn reminder tones back on, and
REMINDER TONES ON will appear on the display.
All Tones: All of the above tones are preset on.
To disable tones, press and hold CLOCK for 5 seconds. Repeat
to turn tones back on.
To Turn Off/On: Press and hold CLOCK for 5 seconds. A tone
will sound when changing tones from OFF to ON. ALL SOUNDS
OFF will appear on the display. Repeat to turn on tones, and ALL
SOUNDS ON will appear on the display.
Tone Pitch: The pitch is preset at high, but can be changed to
low.
To Change: Press and hold BROIL for 5 seconds. A tone will
sound, and TONE PITCH LOW will appear on the display. Repeat
to change, and TONE PITCH HIGH will appear on display.
End of Cycle Tones: Press and hold CONVECT for 5 seconds to
turn off END OF CYCLE TONES. Press and hold CONVECT for
5 seconds to turn on END OF CYCLE TONES.
Key Press Tone: Press and hold WARM (Cooking Options) for
5 seconds, and KEY PRESS TONES OFF will appear on the
display. Press and hold WARM for 5 seconds, and KEY PRESS
TONES ON will appear on the display.
A. Oven light
B. Clock
C. Oven display
D. Start/control lock
E. Cancel/off
F. Temperature/time
G. Broil
H. Bake
I. Timer
J. Auto Clean
AB
C
D
E
F
HG
I
J
Loading ...
Loading ...
Loading ...