Loading ...
Loading ...
Loading ...
Owner’s Manual 17
ENGLISH
Operating Instructions
The controls look like this:
Controls
On/Off Timer
Fan/Cool/Dry
• Everytime you push this button, it will toggle between
COOL, FAN, and DRY.
Power
Temperature Setting
• This button can automatically control the temperature
of the room. The temperature can be set within a range of
60°F to 86°F by 1°F.
Select the lower number for lower temperature of the room.
Fan Speed
Energy Saver
The fan stops when the compressor stops cooling.
• Approximately every 3 minutes the fan will turn on and
check the room air to determine if cooling is needed.
Each press of the button cycles through the options in this
order: 1 Hour → 2 Hours → 3 Hours → 4 Hours → 5 Hours
→ 6 Hours → 7 Hours → 8 Hours → 9 Hours → 10 Hours →
11 Hours → 12 Hours → CANCLE.
The set temperature will be raised 2°F after 30 minutes
and again after another 30 minutes.
Each press of the button cycles through the options in this
order: 1 Hour → 2 Hours → 3 Hours → 4 Hours → 5 Hours
→ 6 Hours → 7 Hours → 8 Hours → 9 Hours → 10 Hours →
11 Hours → 12 Hours → CANCLE.
• To turn the unit ON, push the button. To turn the unit OFF,
push the button again.
• This button takes priority over any other buttons.
• When the unit is first powered up, it defaults to settings of
High Cool at 72°F.
• Pressing the Fan Speed button toggles between Low and
High speeds.
- Stopping Operation
- Stopping Operation
Remote Control Operations
Loading ...
Loading ...
Loading ...