Sony STR-DG600 Operating Instructions

Loading ...

C:\Documents and

Settings\pc13\Desktop\JC060000_2662260114DG600_US\2662260116\US03CON_STR-DG600-

U.fm

masterpage: Left

STR-DG600

2-662-260-11 (6)

6: Selecting the speaker

system

You can select the front speakers you want to

drive.

Be sure to use the buttons on the receiver for

this operation.

Press SPEAKERS (OFF/A/B/A+B)

repeatedly to select the front

speaker system you want to drive.

To turn off the speaker output, press

SPEAKERS (OFF/A/B/A+B) repeatedly until

the “SP A” and “SP B” indicators on the

display do not light up.

7: Calibrating the

appropriate settings

automatically

(AUTO CALIBRATION)

This receiver is equipped with D.C.A.C.

(Digital Cinema Auto Calibration)

Technology which allows you to perform

automatic calibration as follows:

• Check the connection between each speaker

and the receiver.

• Adjust the speaker level.

• Measure the distance of each speaker to your

listening position.

You can also adjust the speaker levels and

balance manually. For details, see

“8: Adjusting the speaker levels and balance

(TEST TONE)” (page 36).

1 Connect the supplied ECM-AC2

optimizer microphone to the

AUTO CAL MIC jack.

2 Place the optimizer

microphone at your listening

position.

3 Place the speakers so that the

speakers are facing the

optimizer microphone.

To select Light up

The speakers connected to the

SPEAKERS FRONT A terminals

SP A

The speakers connected to the

SPEAKERS FRONT B terminals

SP B

The speakers connected to both the

SPEAKERS FRONT A and B

terminals (parallel connection)

SP A and

SP B

?/1

AUTO CA L MIC

SPEAKERS

(OFF/A/B/A+B)

PHONES

MEMORY/

ENTER

Sony STR-DG600 Multi Channel AV Receiver

Operating Instructions - Page 32