Loading ...
INTRODUCTION
To the owner or user: The service manual you are
reading is intended to provide you, and the
maintenance or service technician with the
information needed to install, start up, clean,
maintain, and service this ice maker-dispenser.
The MDT6 is a combination nugget ice maker and
countertop dispenser. A water station is standard.
The ice making section is equipped with the
following features: electronic controls for bin level
and low water; thermostatic expansion valve; front
service for most components; and R-404A
refrigerant. The ice dispensing section is a
seamless plastic storage bin, with a stainless steel
ice agitator at the bottom to sweep the ice into the
dispensing chute.
MDT6N90 User Manual
November 2008
Page 1
Table of Contents
FOR THE INSTALLER: Specifications ······························ Page 2
FOR THE INSTALLER ······································ Page 3
FOR THE PLUMBER ······································· Page 4
FOR THE ELECTRICIAN ····································· Page 5
FOR THE INSTALLER: Final Check List ····························· Page 6
INITIAL START UP ········································ Page 7
OPERATION: Ice or Water Vending ······························· Page 8
DISPENSE AREA SANITATION ································· Page 9
CLEANING and SANITIZING ··································· Page 10
SENSOR MAINTENANCE ···································· Page 11
BEARING MAINTENANCE ···································· Page 12
SERVICE DIAGNOSIS ······································ Page 13
CONTROL SYSTEM DIAGNOSTICS ······························ Page 14
Note this symbol when it appears.
It marks a possible hazard.
Loading ...
Loading ...
Loading ...