Loading ...
Loading ...
Loading ...
12
NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the wine cellar will not start.
When you use the wine cellar for the first time or restart the wine cellar after having been shut off for a
long time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and it is due to the length of the activation time. Once
the wine cellar is running for a few hours everything will be back to normal.
STORAGE
Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able
to store may vary.
NOTE: Capacity:
Bottle capacities are approximate maximums when storing traditional Bordeaux 750 ML bottles and
include bulk storage.
INTERIOR LIGHT
• You can turn the interior light on or off by pushing the button marked
DOOR LOCK
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the User’s Guide. Insert the key into the lock
and turn it counterclockwise to unlock the door. To lock the door do the reverse operation making
sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.
SHELVES
The appliance is equipped with the wired shelves.
You can move the shelves out and in smoothly.
• To prevent damaging the door gasket, make sure
to have the door all the way opened when pulling
the bottom shelf out of the rail compartment.
• For easy access to the storage content, you can
pull the shelf approximately 50% out of the rail
compartment, however this unit was designed
with a stopper on each side of the shelf track to
prevent bottles from falling.
• When removing the shelf out of the inner rail,
make sure to remove all items first. Then pull the
shelf until it is stopped by the stopper, and then lift the shelf. In order to replace the shelf, repeat
steps described above in reverse.
PULL-OUT ROLLER SHELVES
• To prevent damaging the door gasket, make sure to have the door all the way opened when
pulling shelves out of the rail compartment.
• For easy access to the bottles, you must pull the shelves approximately 1/3 out of the rail
compartment.
• To remove the shelves out of the rail pull each shelf approximately 1/3 out. Use a long flat
screwdriver to press down the right plastic notch as shown in Figure A and at the same time lift
the left plastic notch as shown in Figure B. Then proceed to pull out the shelf slowly. Contact our
Loading ...
Loading ...
Loading ...