User Manual - Page 11

For NS-CZ50WH0. Also, The document are for others Insignia models: NS-CZ50WH0-C, NS-CZ70WH0, NS-CZ70WH0-C

Loading ...
Loading ...
Loading ...
11
5 or 7 Cu. Ft. Chest Freezer
www.insigniaproducts.com
Food in my
freezer is not
cold
The door is not closed
completely or has been
opened too often.
Check the door gasket and food
distribution and make sure that the door
closes completely.
You have just added a
large amount of food to
your freezer.
Allow time for the new food to cool, then
check again.
Your freezer has recently
been disconnected for a
period of time.
Allow time for your freezer to cool before
adding food. Your freezer needs four hours
to cool down completely.
The thermostat is set too
warm.
Set the thermostat to a colder setting.
My freezer
makes
unusual
noises or
vibrations
Your freezer may not be
level on the floor.
Level your freezer with the leveling feet.
The body of your freezer
is touching a wall.
Move your freezer out from the wall.
Metal parts undergo
expansion and
contraction.
This is normal.
Refrigerant is circulating
throughout the system.
This is normal.
Moisture is
building up in
the interior of
my freezer
The door has been
opened too often or is
not closed correctly.
Check the door gasket and food
distribution and make sure that the door
closes completely.
Your freezer is in a
location that is very
humid.
Move your freezer to a dryer location.
The weather is hot and
humid.
This is normal.
The
compressor
turns on and
off frequently.
The room temperature is
hotter than normal.
This is normal.
You have just added a
large amount of food to
your freezer.
Allow time for the new food to cool, then
check again.
The door is not closed
completely or has been
opened too often.
Check the door gasket and food
distribution and make sure that the door
closes completely.
Your freezer has recently
been disconnected for a
period of time.
Allow time for your freezer to cool before
adding food. Four hours are required for
your freezer to cool down completely.
The thermostat was not
set correctly.
Set the thermostat to the correct setting.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Loading ...
Loading ...
Loading ...