Loading ...
Loading ...
Loading ...
18
English
Clock/Timer
Clock setting
There are two possible methods for setting the
clock: manually or automatically by using RDS.
Automatic clock setting
Refer to “Setting the RDS clock”.
Manual clock setting
The clock can be set in either 12-hour or
24-hour mode ("AM
12:00" or "00:00" for
example).
1 In standby mode, press and hold CLOCK/RDS
on the remote control.
➜ SET CLOCK is displayed briefly. Then, the
clock digits for the hours flash.
2 Press Ç on the remote control to select clock
mode.
➜ "12 TO 24 HOUR" or "24 TO 12 HOUR"
scrolls once. Then, the clock digits for the hours
continue to flash.
3 Adjust VOLUME -/+ (or press VOL +/- on the
remote control) to set the hours.
4 Press CLOCK/RDS again.
➜ The clock digits for the minutes flash.
5 Adjust VOLUME -/+ (or press VOL +/- on the
remote control) to set the minutes.
6 Press CLOCK/RDS to confirm the time.
Timer setting
● The system can be used as an alarm clock,
whereby the CD, FM or USB is switched on at a
set time (one time operation). The clock time
needs to be set first before the timer can be
used.
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 In standby mode, press TIMER/SLEEP on the
remote control for more than two seconds.
2 Press SOURCE repeatedly to select the sound
source.
➜ “SET TIME” and “SELECT SOURCE” are
displayed.
3 Press TIMER/SLEEP to confirm your desired
mode.
➜ “SET ON TIME” is displayed and the clock
digits for the hours flash.
4 Adjust VOLUME -/+ (or press VOL +/- on the
remote control) to set the hours.
5 Press TIMER/SLEEP again.
➜ The clock digits for the minutes flash.
6 Adjust VOLUME -/+ (or press VOL +/- on the
remote control) to set the minutes.
7 Press TIMER/SLEEP to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating timer
● In standby or during playback, press TIMER/
SLEEP once on the remote control.
➜ Display shows if activated, and disappears if
deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1 Press TIMER/SLEEP on the remote control
repeatedly to select a preset time.
➜ The selections are as follows (time in
minutes):
6060
6060
60 ™
4545
4545
45 ™
3030
3030
30 ™
1515
1515
15 ™
00
00
0 ™
6060
6060
60 …
➜ "SLEEP XX" is displayed. "XX" is the time in
minutes.
➜ is displayed if the sleep time you have
selected is not 0.
2 When you reach the desired length of time, stop
pressing the TIMER/SLEEP button.
To deactivate the sleep timer
● Press TIMER/SLEEP repeatedly until "0" is
displayed, or press Eco Power/STANDBY-IN
2.
pg 001-025_MCM398D_22-Eng 2007.5.9, 10:1118
Loading ...
Loading ...
Loading ...