Loading ...
Loading ...
Loading ...
Getting started
Preparing to use your headset with a Bluetooth® device
Before you can start using your headset with a Bluetooth® device, you need to pair
the headset with the Bluetooth® device manually using Bluetooth® or
automatically using NFC.
To manually pair your headset with a Bluetooth® device
1 Bluetooth® device: Make sure the Bluetooth® function is turned on.
2 Turn o your headset.
3 Headset: Press and hold down the Power key until a blue notification light
starts flashing rapidly.
4 Bluetooth® device: Scan for Bluetooth® devices, then select SBH60 in the
list of available devices.
5 Bluetooth® device: Follow the pairing instructions that appear on the
screen.
To automatically pair your headset with a Bluetooth® device
1 Bluetooth® device: Make sure that the NFC function is turned on and that
the screen is active and unlocked.
2 Place the Bluetooth® device over your headset so that the NFC detection
area of each device touches the other.
3 Bluetooth® device: Follow the pairing instructions that appear.
The device used in this illustration is for illustration purposes only and may not accurately
depict the actual device used.
To reconnect to a paired Bluetooth® device
• Briefly press the Call key.
Using your headset in wired mode
You can also use your Stereo Bluetooth® Headset SBH60 as a wired headset, that
is, in wired mode. When you insert an audio cable into the 3.5 mm audio jack, the
headset gets disconnected from any paired Bluetooth® devices and turns o
automatically. You can then use the headset in wired mode, that is, using a wired
connection that does not require the headset to be turned on.
7
This is an internet version of this publication. © Print only for private use.
Loading ...
Loading ...
Loading ...