Loading ...
Loading ...
Loading ...
Installation Instructions Section 2
10
Part Number 000006520 Rev 03 12/19
Water Supply and Drain Line Sizing/Connections
The exact locations of inlets and drains for the model you are working on may vary.
Typical Water Supply Drain Installation
!
Caution
Plumbing must conform to state and local codes.
Location
Water
Temperature
Water Pressure Ice Machine Fitting
Tubing Size Up to Ice
Machine Fitting
Ice Making
Water Inlet
35°F (1.6°C) Min.
90°F (32.2°C) Max.
20 psi (1.4 bar) Min.
80 psi (5.52 bar) Max.
3/8" (.95 cm) Female Pipe Thread
3/8" (.95 cm) min inside diameter
1/2" (1.27 cm) S3300/ST3000 Only
Ice Making
Water Drain
--- ---
1/2" (1.27 cm) Female Pipe Thread
3/4" (1.91 cm) FPT S3300/ST3000
3/4" (1.91 cm) FPT Base Drain
S3300/ST3000 Only
1/2" (1.27 cm) min inside diameter
3/4" (1.91 cm) S3300/ST3000 Only
Condenser
Water Inlet
90°F (32.2°C) Max.
Standard
20 psi (1.4 bar) Min.
150 psi (10.34 bar) Max.
High Pressure Option
20 psi (1.4 bar) Min.
350 psi (24.1 bar) Max.
3/8" Female Pipe Thread
3/4" Female Pipe Thread S3300/ST3000 Only
Condenser
Water Drain
--- ---
1/2" (1.27 cm) Female Pipe Thread
3/4" (1.91 cm) FPT S3300/ST3000
1/2" (1.27 cm) min inside diameter
3/4" (1.91 cm) S3300/ST3000 Only
Bin Drain
--- --- 3/4" (1.91 cm) Female Pipe Thread
3/4" (1.91 cm) minimum
inside diameter
Large Capacity
Bin Drain
--- --- 1" (2.54 cm) Male Pipe Thread 1" (2.54 cm) min. inside diameter
ELECTRICAL ENTRANCE
18" (46 CM) VENT TUBE
AIR GAP
1/2" (1.3 CM) MIN
DRAIN ID
1/2" DRAIN CONNECTION
PLASTIC FITTING ON OPPOSITE
SIDE DO NOT APPLY HEAT
OPEN, TRAPPED AND
VENTED DRAIN
DO NOT TRAP DRAIN LINE,
LEAVE AIR GAP BETWEEN
DRAIN TUBE AND DRAIN
3/8" FPT ICE MAKING WATER INLET FITTING,
PLASTIC FITTING ON OPPOSITE SIDE DO NOT
APPLY HEAT
1/2" FPT CONDENSER WATER DRAIN
(WATER COOLED UNITS ONLY)
3/8" FPT CONDENSER WATER INLET
(WATER COOLED UNITS ONLY)
1/2" CPVC SOCKET AUXILLARY
BASE DRAIN
Loading ...
Loading ...
Loading ...