Loading ...
Loading ...
Loading ...
8
en-us Before you begin
Before you begin
Before you begin
Tools and parts needed
▯ Phillips Head Screwdriver
▯ Pencil
▯ Drill with ¼" (6 mm) bit
▯ Jigsaw
▯ Tape Measure
Note: Additional materials may be necessary for
installation in solid surface countertops. Contact the
countertop manufacturer.
Parts included
Preparing fitted units
Fitted units must be heat-resistant up to 90 °C. The
stability of the fitted unit must be guaranteed even after
the cut-outs have been made.
Make the cut-out in the worktop for one or more Vario
appliances in accordance with the installation drawing.
The angle between the cut surface and the worktop must
be 90°.
After making the cut-outs, remove any shavings. Seal cut
surfaces with heat-resistant material.
Observe the minimum clearance of 10 mm between the
bottom of the appliance and unit parts.
When installing multiple Vario appliances: Remember to
take the space required for the VV 200 010/020
connection strip between the appliances into account.
The appliances can also be installed in individual
cutouts, keeping a minimum clearance of 40 mm between
them.
Appliance dimensions
'1
I
ODWGXFW
é
èʌ¼ʓʘ
ç¼ʓʘ
ʎ¼ʚ
ʌ¼ʓʘ
èè¼ʓʘ
èè¼ʓʘ
ʎ¼ʚ
PP
Loading ...
Loading ...
Loading ...