Loading ...
Loading ...
Loading ...
5
OPERATING/ASSEMBLY
INSTRUCTIONS
AND USE
REVERSIBLE CHOPPING/
GRINDER BLADE
The Tasty
™
by Cuisinart
®
4-Cup Mini Food
Processor is equipped with a reversible blade.
This blade is sharp on one side and blunt on the
other. The blade is attached to a plastic ring that
slides over the plastic blade sheath, so it can
be easily turned over to select the appropriate
blade. To reverse the blade, see detailed
instructions on page 5. Also see Operating
Techniques Chart (pages 8–9).
Assemble the parts:
1. Place the work bowl
on a at, dry, stable
surface near an
electrical outlet with the
same specications as
the food processor.
2. The fully assembled
two-piece metal blade assembly (A) should
be attached to the bottom of the work bowl.
If not, slide it onto the plastic shaft (B) in the
bowl.
IF METAL BLADE RING (C) HAS NOT BEEN
ATTACHED TO PLASTIC SHEATH (D), OR TO
SAFELY REASSEMBLE BLADE ASSEMBLY
AFTER USE AND CLEANING, CAREFULLY
FOLLOW THESE INSTRUCTIONS:
Assembling or removing the blade ring/
chopping blade
ALWAYS HOLD THE BLADE RING BY THE
CENTRAL HUB’S HOLDING GRIPS (E). DO NOT
TOUCH THE RAZOR-SHARP BLADES!
To assemble using base of bowl to turn blade:
1. Turn work bowl upside down and stand the
sheath on the plastic shaft in the bowl.
2. Place the metal blade ring (C) over the sheath,
lining up the two notches at the bottom of the
blade ring with the two ridges (F) on either
side of the sheath. Let the blade ring slide to
the bottom of the sheath and line up the two
notches on the bottom of the blade ring to the
two notches on the bottom of the bowl.
3. Grasp the top of the sheath rmly and turn
counterclockwise to lock the blade into place
on the sheath. The two notches will guide the
blade ring without you needing to touch it.
4. To remove the blade from the sheath, stand
the metal blade assembly on the overturned
work bowl, lining up the two notches on the
bottom of the blade ring to the two notches
on the bottom of the bowl and turn the sheath
clockwise to unlock the blade. Holding the
central hub by the grips, carefully lift the blade
ring off the sheath.
To assemble chopping blade by hand:
1. Carefully place the metal blade ring (C) over
the sheath (D), lining up the two notches in the
interior of the center hub with the two ridges
(F) on either side of the sheath. Let the blade
ring slide to bottom of sheath.
2. Grasp the top of the sheath rmly and, holding
the grips (E) on the central hub of the blade
ring, turn the blade sheath clockwise to lock it
into place on the sheath.
3. To remove the blade from the sheath, hold
the sheath rmly and, holding the central
hub by the grips, turn the blade sheath
counterclockwise to unlock it and carefully lift
it off the sheath.
A
B
RAISED NOTCHESRAISED NOTCHES
C
D
F
E
E
Chopping Blade
Blade Sheath
Loading ...
Loading ...
Loading ...