Comfort Zone CZ57BK 1,500W Fan Forced Electric Space Heater

User manual Electric Heater

Features

• Digital Thermostat with Ambient Temperature Setting
• 24-Hour Timer
• 1-Hour Quick Start Temperature Setting
• 3 Settings: Auto, Low Heat (750W), High Heat (1500W)
• Safety Tip-Over Switch
• Safety Overheat Cut-Off Protection
• Backlit LED Digital Display Panel
• 120V A.C. 60Hz., 12.5A, 5120 BTUs

OPERATION

The heater may be operated by the controls located on the heater (see Fig. 1).

1. Carefully remove the heater from the plastic bag and the carton.
2. Place the heater on a firm level surface.
3. Plug the cord into a 120V electrical outlet. The heater is ready to use.
4. Turn the heater ON by pressing Mode/OFF on the control panel (Fig.1).
5. To turn the heater OFF, press Mode/OFF button. NOTE: When the unit is powered off on the control panel, the fan may continue to run for a while to cool off the heating elements and dispense any retained heat. The unit will shut off automatically.
6. Press MODE button to select LOW, HIGH or AUTO heating power. LED screen will display:

• LOW: 750W

• HIGH: 1500W

• AUTO: Heater will automatically adjust the heat output to reduce energy use and lower heating costs. If the room temperature is well below the set temperature, the heater will operate at HIGH output. As the room temperature gets closer to the set temperature, the heater will automatically reduce the heat output until the set temperature is reached.

• QUICK START TEMPERATURE SETTING: Press 1HR button and the heater will automatically set to 77 °F (25 °C) and will automatically adjust its heat output between LOW or HIGH. The unit will cycle on and off for 1 hour to reach and maintain the 77 °F (25 °C) temperature. To change the temperature, press the temperature buttons "+" or "—" to adjust temperature setting UP or DOWN with the 1 Hour timer continuing to work. To turn the quick start setting off when in QUICK START TEMPERATURE SETTING, press the "1HR" button. If the "Timer" or "Mode/OFF" display button is pressed while in QUICK START TEMPERATURE SETTING this will over-ride the Quick Start Temperature function.

NOTE: The 1 Hour Quick Start Setting is not an excuse to leave the heater unattended.

TEMPERATURE SETTING

1. This heater is designed to maintain a comfortable room temperature.
2. When the heater is turned on by pressing the Mode/OFF button, it will operate on LOW setting continuously. The digital panel will display along with the current room temperature.
3. The temperature setting can be adjusted between 42°F to 99°F under any mode. In the display panel, the number at the bottom is the current room temperature while the number on top is the set temperature (Fig 1). To change the temperature, press the temperature buttons "+" or "—" to adjust the temperature setting UP or DOWN.
4. While the heat setting is in either LOW or HIGH mode, the unit will stay in this mode, cycling on and off to maintain the set temperature. The heater will reach the set temperature faster in HIGH setting in comparison to LOW setting.
5. While the heat setting is in AUTO mode, the unit will automatically adjust its heating output between LOW or HIGH. The unit will cycle on and off to maintain the set temperature.

TIMER MODE

The Timer function allows you to set the length of operation from 1 minute to 23 hours and 59 minutes. Press the timer button once to adjust the minute. Press the button the second time to adjust the hour. Press the button the third time to set the timer.

TO TURN THE TIMER FUNCTION OFF

Under timer mode, continuously adjust the the timer until the LED screen displays "00:00".

NOTE: The timer function is not an excuse to leave the heater unattended.

SAFETY FEATURES

1. A thermal overload protector is built into prevent overheating: When an overheat temperature is reached, the Heater/fan will automatically shut off. It will only resume operation when the user resets the unit by unplugging the heater for 10 minutes to allow it to cool. Plug the heater in and resume use.

2. Safety Tip-Over Switch is built-n to automatically turn off the heater if it tips over.

ENVIRONMENT

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.

Contact your local government for information regarding the collection systems available.

If electrical appliances are disposed on in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

When replacing old appliances with new ones, the retailer may be legally obligated to take back your old appliance for disposal free of charge.

MAINTENANCE

WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING!

CLEANING: IMPORTANT! DO NOT IMMERSE HEATER IN WATER! Clean the heater grille with the vacuum brush attachment on your vacuum cleaner. This will remove lint and dirt from inside the heater. DO NOT ATTEMPT TO TAKE APART THE HEATER. DO NOT REMOVE THE HEATER GRILLE. Clean the body of the Heater with a soft cloth.

CAUTION: Do not use gasoline, benzene, paint thinner, harsh cleaners, etc. as they will damage the heater. NEVER USE ALCOHOL OR SOLVENTS.

STORAGE: Store the heater with these instructions in the original carton in a cool, dry place.

Related Products