User Manual Frigidaire FFRH0822RE Window-mounted Room Air Conditioner

For most air conditioners, the filter can be found by opening the front panel. Since it’s a reusable filter, you can simply remove and clean using warm, soapy water. After cleaning, allow the filter to dry thoroughly before replacing it. You may also vacuum the air filter to remove excess dirt and particles.

When this mode is enabled, the selected temperature will increase by 2 °F 30 minutes after the mode is selected.

The temperature will then increase by another 2 °F after an additional 30 minutes. This new temperature will be maintained for 7 hours before returning to the originally selected temperature.

This ends the “Sleep” mode and the unit will continue to operate as originally programmed. You may also cancel sleep mode at any time by again pressing the sleep button.

When this feature is on, the electronic air purifier is energized to remove pollen and impurities from the air. To cancel this feature, press the Clean Air button.

If you plan to store the air conditioner during the winter, remove it carefully from the window according to the installation instructions. Cover it with plastic or return it to its original carton.

NOTE: To prevent rust or electrical connections from being damaged, store air conditioner in an upright position and a dry place.