Loading ...
Loading ...
Loading ...
5. Gently pour water into the fountain basin, being
careful not to overflow and cause splashing. Make
sure the water completely submerges the pump
and the water runs clear during operation.
NOTE: We recommend that you use distilled water
to prevent scale build-up. The first time you operate the
pump it can take up to 5 minutes for the air to be
completely expelled and water begins to flow properly
6. Plug the pump and light cord into your local power
supply. Make sure that there is no water around
the plug & always keep the power source in a dry
place.
7. You can now adjust the water pump to your flow
preference. (see Quick Tip #1) Once set, install the
Back Door Cover by sliding it into the designated
opening.
8. Congratulations, your fountain is now complete.
Don’t forget to add water regularly as water will
evaporate over time.
Relax and enjoy your new fountain.
6
Alpine Quick Tip #3
Make sure your pump
and light cords are
tucked neatly into the
cord slot.
7
Loading ...
Loading ...
Loading ...