Loading ...
SPOUT
WATER FILTER
VIEWING WINDOW
MAX MARK INDICATOR
POWER NEON
(RED)
POWER BASE
CORD TIDY
LID SEAL
HINGED LID
LID RING
LID PIP (3x)
SURE GRIP HANDLE
ON/OFF SWITCH
POWER CORD
KNOW YOUR CLASSIC JUG KETTLE
1
1
Place the kettle as close to the wall
socket as possible. When in use ensure
the kettle is not placed under kitchen
cabinets. DO NOT STORE OR
USE YOUR KETTLE IN AN
APPLIANCE GARAGE OR
UNDER CUPBOARDS.
Use the shortest cord possible.
Wrap excess cord round the
cord tidy on the base of
the kettle.
Do not operate on an inclined
plane.
Do not operate in a tray.
POSITION
SETTING UP
3 4
2
INCLINED PLANE NOT IN A TRAY
2
3
CORD TIDY
All illustrations are for representation only, your model may vary from illustrations shown. In the interest of improving products, Dualit Ltd.
reserves the right to change the product specication without prior notice.
FILLING YOUR KETTLE
Ensure the kettle is unplugged. Remove the
kettle from the power base. Gently pull the lid
ring up and back to open the lid.
WARNING: IF THE KETTLE HAS JUST BOILED, IT WILL BE FULL OF STEAM, WHICH WILL ESCAPE AS SOON AS
THE LID IS OPENED. THE LID WILL BE HOT. USE THE LID RING TO OPEN AND CLOSE THE LID.
Fill the kettle through the lid opening. Use at
least one cup of water (250ml). The water level
must stay below the ‘max’ mark. Save energy,
only boil what you require. Keep kettle upright
and level at all times when lling. Do not tilt
kettle backwards. DO NOT OVERFILL OR
FILL THROUGH THE SPOUT.
Push the lid down using the lid ring to close.
Tip: If the lid is too tight, try pushing in the
pips on the inside of the lid with a spoon
handle. Pushing the lid pips back out will give
a tighter t. WARNING: IF THE LID IS
TOO LOOSE, RISK OF SCALDING.
OPEN LID
LID TIGHTNESS
BOILING WATER
1
Plug the kettle into the power socket. Press the
‘On/Off’ switch down. The power neon will
illuminate and the kettle will start to heat up.
If the kettle is accidentally switched on with no
water inside, the boil-dry device will switch off the
heating element to prevent damage to the kettle.
The kettle will automatically turn off after the
water has boiled.
To turn off before the water has boiled lift
the ‘On/Off’ switch up.
Always unplug the kettle after each use.
Remove kettle from the power base.
To avoid the risk of splashing, once the kettle
has boiled wait 10 seconds then pour slowly.
Do not over-tilt the kettle.
TURN ON
3
POURING
2
TURN OFF
CLEANING & CARE
1 3
Unplug and let the kettle cool down
completely before cleaning. Remove the
kettle from the power base.
Wipe the outside and inside surfaces of the
kettle with a damp cloth.
Unplug and let the kettle cool. Open the lid.
Hold the top of the lter, pull up and out of
the kettle. Rinse under a tap while carefully
brushing it with a soft brush.
Rinse the kettle out with fresh water.
DO NOT OPERATE KETTLE
UNLESS THE WATER FILTER IS
CORRECTLY IN POSITION.
Use descaling products suitable for kitchen
appliances, these are readily available online
or from most supermarkets or department
stores. Use as per instructions on the packet.
Follow these few simple steps to minimise
scale build up in your kettle: Empty the kettle
after each use; do not allow water to stand in
the kettle overnight. Use ltered water instead
of tap water. Descale the kettle regularly, at
least once a month. If you live in a hard water
area you may need to descale more often.
When descaling has nished, empty the
kettle and rinse it out a minimum of 3 times
with fresh water, then rell with fresh water,
boil, then discard boiled water. FAILURE
TO DO SO CAN CAUSE INJURY.
DO NOT BOIL KETTLE WITH
DESCALING SOLUTION IN IT.
THE BODY
2
WATER FILTER DESCALE REGULARLY
KETTLE REPAIR
Core components of your kettle are replaceable!
The Classic Kettle has been built to last, but should you experience any fault with your kettle, please contact Dualit for advice. The
Classic Kettle is repairable and tted with a patented, repairable element. Simply contact our helpline on 01293 652 500 or visit www.
dualit.com/support for repair or servicing advice.
All servicing must be carried out by Dualit or authorised repair agent.
For your own protection only use original Dualit spares in your kettle. Fitting of non Dualit parts will invalidate the guarantee.
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
INSTRUCTIONS ON ENVIRONMENT PROTECTION
Do not dispose of this product in the usual household garbage at the end of its life cycle. Please hand
it over to a collection point for the recycling of electrical and electronic appliances. The symbol on the
product, the instruction of use or the packaging will inform you about the methods of disposal. The
materials are recyclable as mentioned on its marking. By recycling, material recycling or other forms of
re-utilization of old appliances you are making an important contribution to protect our environment.
Please inquire at the community administration for the authorised disposal location.
FILLING