User Manual Hestan AEAD42 Aspire 42" Steeletto Outdoor Double Access Doors

Documents for Hestan AEAD42

The following documents are available:
User Manual Other Documents
  • Brochure - (English) Download
  • Specification Sheet - (English) Download
  • Trash Bin Conversion Instructions - (English) Download
Photos
AEAD42 photo
©2017 Hestan Commercial Corporation
1
OUTDOOR CABINETS
Installation Instructions
AETRC / AETC
CABINET INSTALLATION (AETRC)
IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN
INSTALLER SHOULD LEAVE THESE INSTRUCTIONS WITH THE HOMEOWNER
1. Your new Aspire cabinets come with doors and drawers pre-installed in their frames. It will be necessary
to detach them before installing the frame in your island structure. To remove the drawer(s) from the
frame, press the release lever (see below) on each side of the drawer to disengage the slide (up on the left,
down on the right), then pull the drawer all the way out.
Some parts have sharp edges. Care must be taken when handling the various components to avoid personal
injury. Wear gloves when handling.
TOOLS REQUIRED:
Work gloves
Safety glasses
Electric drill with assorted bits for mounting hardware, masonry anchors, etc. where needed
Phillips screwdriver
Flat-blade screwdriver
Level
Tape measure
Inspect the product to verify that there is no shipping damage. If any damage is detected, call the shipper and
initiate a damage claim. Hestan Commercial Corp. is not responsible for shipping damage. DO NOT discard
any packing material (box, pallet, straps) until the unit has been inspected.
Remove all exterior packaging materials, banding, tape, etc. Remove all protective film from the inside of your
cabinets. You may leave any exterior protective film on until after installation is complete.
RELEASE
LEVER
FRAME
Loading ...
Loading ...
Loading ...