AEG FFB72746PM Dishwasher

User Manual - Page 19

For FFB72746PM. Also, The document are for others AEG models: FFB72746PW

PDF File Manual, 26 pages, Read Online | Download pdf file

FFB72746PM photo
Loading ...
Loading ...
Loading ...
With some problems, the display
shows an alarm code.
The majority of problems that can
occur can be solved without the need
to contact an Authorised Service
Centre.
Problem and alarm code Possible solution
You cannot activate the ap-
pliance.
Make sure that the mains plug is connected to the
mains socket.
Make sure that there is no damaged fuse in the fuse
box.
The programme does not
start.
Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or wait for the
end of the countdown.
The appliance does not fill
with water.
The display shows or
.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not
too low. For this information, contact your local water
authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clogged.
Make sure that the inlet hose has no kinks or bends.
The appliance does not
drain the water.
The display shows .
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or bends.
The anti-flood device is on.
The display shows .
Close the water tap and contact an Authorised Service
Centre.
The appliance stops and
starts more times during op-
eration.
It is normal. It provides optimal cleaning results and en-
ergy savings.
The program lasts too long. Select the TimeSaver option to shorten the program
time (if applicable).
If the delayed start option is set, cancel the delay setting
or wait for the end of the countdown.
The remaining time in the
display increases and skips
nearly to the end of program
time.
This is not a defect. The appliance is working correctly.
The options of the program
have to be set again every
time.
To save your favourite configuration use option MyFa-
vourite.
Small leak from the appli-
ance door.
The appliance is not levelled. Loosen or tighten the ad-
justable feet (if applicable).
The appliance door is not centred on the tub. Adjust the
rear foot (if applicable).
www.aeg.com18
Loading ...
Loading ...
Loading ...