GC3128/02 User Manual

Loading ...

4 When the temperature light goes out, wait a while before you start

ironing.

During ironing, the temperature light goes on from time to time. This

indicates that the iron is heating up to the set temperature.

Using the appliance

Note: The iron may give off some smoke when you use it for the rst time. This

stops after a short while.

Steam ironing

1 Make sure that there is enough water in the water tank.

2 Settherecommendedironingtemperature(seechapter‘Preparing

foruse’,section‘Settingthetemperature’).

3 Set the appropriate steam setting. Make sure that the steam setting

you select is suitable for the ironing temperature selected:

1 - 2 for moderate steam (temperature settings 2 to 3)

3 - 4 for maximum steam (temperature settings 3 to MAX)

Note: The iron starts to produce steam as soon as it has reached the

set temperature.

Ironing without steam

1 Set the steam control to position 0 (= no steam).

2 Settherecommendedironingtemperature(seechapter‘Preparing

foruse’,section‘Settingthetemperature’).

Features

Spray function

You can use the spray function at any temperature to moisten the article

to be ironed. This helps remove stubborn creases.

1 Make sure that there is enough water in the water tank.

2 Press the spray button several times to moisten the article to be

ironed.

Steam boost

A powerful steam boost helps remove stubborn creases.

The steam boost function can only be used at temperature settings

between 2 and MAX.

ENGLISH6

Loading ...

User Manual - Page 6