Loading ...
Loading ...
Loading ...
VIZIO P42 HDTV User Manual
Version 6/14/2006 31
www.VIZIOCE.com
d. Press the button twice to highlight
TV/Cable. Use the button to
select either TV or Cable. TV sets the
tuner for an antenna and Cable sets
the tuner for a cable or satellite dish.
e. Once selected, press the button
once more to highlight Channel
Search to scan the available channels.
Use the button to start the search.
Note: This will take a few minutes to
complete.
f. Press the MENU button repeatedly to exit the On Screen Display (OSD).
g. To add or delete a channel press to Set Channel. Use the or buttons to rotate
to the desired channel number and change to Yes or No under Skip Channel setting.
6. Using DTV with an Antenna or Cable
When connecting to an antenna or cable for the DTV input, you will need to select the DTV
source within the On Screen Display (OSD) menu and Auto Search for the available TV channels.
See Sec. 3.4 DTV Tuner Setup. Note: DTV digital broadcast is not available in all areas. Refer
to www.antennaweb.org
to get information about availability in your area, type of antenna and in
which direction to point your antenna. The channel availability through cable depends upon
which channels your cable operator supplies in Clear QAM; consult your cable operator for more
information.
7. Using a PC
If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1024x768 at
60Hz for best picture quality (refer to the graphic card’s user guide for questions on how to set
this timing mode).
Loading ...
Loading ...
Loading ...